INSTALLATION GUIDE FOR IN-GROUND TRAMPOLINES
When you purchase a Capital Play in-ground trampoline from The Jump Shack, you will get a quality, user friendly product that offers easy assembly and installation from an in-ground trampoline company in Phoenix.
If the task is too much to undertake yourself, contact us for a free estimate to install your in-ground trampoline.
For more thorough instructions for an in ground trampoline instructions, download the full PDF here:
STEP 1. DIG THE HOLE
Mark the hole before you dig it. Draw a line in the ground as your guide for digging and make sure the hole is a few inches wider than the trampoline itself.
Check the chart below to find the size hole you should dig that is appropriate for the dimensions of your Capital Play in-ground trampoline.
Having a margin for error is important for even, flush placement of your in-ground trampoline. Dig an extra few inches around the diameter of the hole which will then be back-filled later on.
STEP 2. CONSTRUCT THE TRAMPOLINE FRAME
Put the trampoline together by first assembling the top and bottom sections of the frame, followed by the mat and springs. Then secure the frame to the retaining wall.
Attach springs at 3, 9, 12, and 6 o’clock positions first. This makes it easier to attach the following springs and ensures even tension.
STEP 3. PLACE TRAMPOLINE IN HOLE
When placing the trampoline onto the ledge, ensure that the in-ground trampoline frame is the correct height to make it flush with the ground, then proceed with back-filling the gap.
Compact the soil easily with the handle of your shovel. Pack it down tight to avoid issues in the future.
STEP 4. SECURE VENTED PADS TO THE TRAMPOLINE
Once all the measurements, digging, and hard work is complete, attach the TDU vented pads to the trampoline frame, and you can start your fun on your Capital Play in-ground trampoline from The Jump Shack, a local in-ground trampoline installer!
Jump and enjoy!